[Mg-t] Bonnet 'clip'

[Richard Lindsay]

Thanks, everyone.

On Oct 19, 2017 7:43 PM, <scvc70 at epix.net> wrote:

> We made our own version years ago, but they're currently available from K
> & T Vintage Sports Cars  <www.ktvintagecars.com> here in PA (ad in TSO)
>
> Sarah Carr
> TD3942EXLU in PA
>
> -----Original Message----- From: Spook01
> Sent: Thursday, October 19, 2017 6:31 PM
> To: Richard Lindsay
> Cc: mg-t at autox.team.net
> Subject: Re: [Mg-t] Bonnet 'clip'
>
> Aftermarket.  Some few guys have made them, but dunno if any were made
> commercially.
>
> On Oct 19, 2017, at 12:20 PM, Richard Lindsay <richardolindsay at gmail.com>
>> wrote:
>>
>> Hello Friends,
>>    At a recent All British Car Show, sponsored by the Houston MG club, I
>> saw a TD with little clips on the upper ends of the radiator support rods.
>> They allowed the bonnet to rest mostly open, with the lower front rubber
>> corner piece on a little 'U' shaped piece under the bolt. I really liked
>> it. Is it a correct item, or something aftermarket?
>>    Thanks.
>>
>> -rick
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/mg-t/attachments/20171019/477e585f/attachment.html>