[Mg-t] XPAG engine + gearbox weight

[Bud Krueger]

Gearbox, sans remote, weighs in at 60 pounds.
Bud
PopeyMike at aol.com wrote:
> I think you saw my message 217 lbs for full block minus head and minus
> transmission.
>   
> The transmission must not weight too much - since at the age of 62 - I
> could still unbolt it and lift it out from inside the tub by myself.  I  would
> estimate the transmission something less then 100 lbs.  If I  remember (for
> at my age I also forget a lot)  I will weigh it tomorrow  when I am in
> garage.
>   
> Michael Balahutrak
> 53 TD
> _______________________
>   
>   
> In a message dated 3/15/2013 4:50:51 P.M. Central Daylight Time,
> richardolindsay at gmail.com writes:
>
> Hello  Friends,
>
> I'm about to buy a hoist for my garage but I don't want to buy  one much
> bigger than I will ever need. B This leads me to ask the weight of an  XPAG
> engine with gearbox attached, but otherwise stripped as per the workshop
> manual. B
>
> Please advise if you know the weight, or have a good  estimate. B Thank you.
>
> -rick, in Houston.
>
>
> Sent from my  Samsung Galaxy SIII - the rectangle with rounded corners,
> just like a  BlackBerry.
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate:  http://www.team.net/donate.html
> Suggested annual donation   $11.47
> Archive: http://www.team.net/archive
> Forums:  http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/mg-t/popeymike@aol.com
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/budkrueger@comcast.net