[Mg-t] Painting chrome

[Bud Krueger]

But, before painting put on a good quality masking tape to very 
carefully cover the curved edge that retains the chrome finish.
If using the Moss spray can be careful of runs.  Put on a number of very 
thin coats.   Bud
Duvall Video Productions wrote:
> Bob,  you need to scuff it up well to promote adhesion.  sanding with 600
> paper works well.
>
> Then use an epoxy or etch primer.  Both work fine.
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/budkrueger@comcast.net