[Mg-t] over problem

[John F. Quilter]

I would suspect a stuck float needle valve.  One carb may discharge more 
than the other if both valves are stuck open as one carb is nearer the line 
from the fuel pump.  Try knocking on the top of the float bowls to free up 
the stuck valves.

John Quilter
Eugene, Oregon


----- Original Message ----- 
From: "Gene" <crownwheel at comcast.net>
To: "mg-t net" <mg-t at autox.team.net>
Sent: Thursday, September 15, 2011 11:33 AM
Subject: [Mg-t] over problem


> Listers, I received this question form a fellow T'er in Vermont. I am not 
> a
> techie, so I am wondering if any of you have answer to his question as
> follows:
>
>
>
> Am having fairly steady gas flow coming out over flow copper tubes on top 
> of
> one carb more than other which has not happened before that I know of.
>
> Who can help me with this problem?
>
>
>
> Thanks
>
> Cheers
>
> Vermont
>
> Gene
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/mg-t/jquilter@peoplepc.com