[Mg-t] TD Starter Knob

[Bud Krueger]

Bob, the starter knob should be just as flush as the choke knob.  The 
end of the cable can be trimmed where it actuates the starter switch.

Bud Krueger
http://www.ttalk.info/


Bob Donahue wrote:
> The starter knob on my TD sticks out 2 inches in the non-pulled position. This
> just doesn't look right to me. Should it be flush against the dash, or should
> there be some clearance? I assume the clearance is adjusted by shortening the
> cable, correct me if I'm wrong.
>
> Bob Donahue (Still Stuck in the '50s)
> Email - bobmgtd at comcast.net
> Cars:       52 MGTD - #17639
>                 71 MGB - #GHN5UB254361
> Member:  NEMGTR #11470
>                 NAMGBR # 7-3336
>                 Hoosier MGB Club
>                 Olde Octagons of Indiana
> ______________________________________________
>
> Mg-t at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/budkrueger@comcast.net