[Mg-t] Source of Rocker Arm Ass'y

[spook01]

I suggest you listen very carefully to Joe Curto.  He has re-done more carbs 
than your mechanic has ever even seen.
Ray

----- Original Message ----- 
From: <Gunnellj at athenet.net>
To: <Mg-t at autox.team.net>
Sent: Monday, January 19, 2009 8:35 AM
Subject: [Mg-t] Source of Rocker Arm Ass'y


> Mates
>
>   The rebuild of the MG TD engine is moving along well. The main problem 
> is we keep saying "while it's apart, why not do this, too?" So the cost is 
> going up as we add in a front end rebuild and rebuilt shocks. But if we 
> didn't, you just know something would break the week after we put the car 
> back together.
>
>   A few weeks ago, when I asked about parts, someone mentioned a source of 
> a completely rebuilt rocker arm assembly. We did that on the Magnette 
> engine (sourced from Scarborough Faire) and it worked great. Who sources 
> the XPAG rocker arm assembly?
>
>   Anyone have experience with carb pistons that don't go all the way up in 
> the bell (suction chamber)? Joe Curto says the piston only rises 3/4" to 
> 1" and won't get stuck, but my mechanic says the car will have more power 
> if the piston doesn't get stuckj when it goes all the way up. We are 
> sanding the inside of the bell with 1000-grit paper. It takes a long time. 
> Any suggestions?
>
> John Gunnell
> Iola, WI
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> Mg-t at autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive