[Land-speed] KPI

[Neil Albaugh]

Tom;

I've never run a kingpin front end but I'd suggest using zero toe-in and 
camber with between 5 and 10 degrees of caster. Make sure it is the same for 
the left & right sides.

Regards, Neil  Tucson, AZ

--------------------------------------------------
From: "tom sarda" <sardatech at yahoo.com>
Sent: Saturday, March 17, 2012 11:11 AM
To: <land-speed at autox.team.net>
Subject: [Land-speed] KPI

> Hey all, do any of you have an idea as to what king pin inclination should 
> be
> for this type of motorsport? What about caster and toe and camber. My car
> (streamliner) has a 17 ft wheel base, weighs 3000, 23in front tires, 
> straight
> axle, with king pins.
> Center of kingpin to kingpin axle length is 29 and a
> half inches. Length spindle tip to tip is 46 in. I think thats what I 
> measured
> this morning.
> Thanks for your help. Tom
> _______________________________________________
> Land-speed at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/land-speed/neil@dbelltech.com