[Land-speed] pilot bearing -

[Jim Dincau]

John.
     The trans and clutch seem to be OK, I think there is just no way to 
keep the dust out and the lube in without a seal on the bearing.
Jim
----- Original Message ----- 
From: "John Burk" <joyseydevil at comcast.net>
To: "LandSpeed List" <Land-speed at autox.team.net>
Sent: Thursday, January 27, 2011 8:54 PM
Subject: Re: [Land-speed] pilot bearing -


> Jim
>
> I'd vote for an oilite bushing . Could the clutch disc be out of balance 
> or one side of the pressure plate be engaging first . Is the pilot bearing 
> to shaft fit ok ? Have you checked the input shaft for run out .
>
> John Burk
/land-speed/jdincau at qnet.com