[Land-speed] Drilling Plexiglass

[Glen Barrett]

I agree with JD. Have cleaned up lots of it on the salt. Anything with Glass 
must have film to keep it from shattering. Like window tint film. They sell 
a lot at the autoparts store in Wendover.
Glen
----- Original Message ----- 
From: "J.D. Tone" <gmc6power at earthlink.net>
To: <land-speed at autox.team.net>; "Skip Higginbotham" <saltrat at pahrump.com>
Sent: Friday, April 17, 2009 6:24 PM
Subject: Re: [Land-speed] Drilling Plexiglass


>    I do not believe "plexiglass" has ever been sold as shatter 
> resistant...I see the word SHALL and that's postive enough for me. IMO, I 
> do not believe its open for interpretation.
>
>
>
>>
>> JD,
>> Paragraph 3.U suggests LEXAN but does not appear to disallow any 
>> plastic..........to what do you refer? Rich is right, LEXAN is much more 
>> forgiving.
>>
>> Thanks,
>> Skip
>>
>>
>> At 07:03 AM 4/17/2009, you wrote:
>>>I'm not sure but I think "plexiglass" in not allowed. I believe "Lexan" 
>>>(GE Patent)  cast acrylic, or certain Polycarbonates (SP?) is allowed as 
>>>Rich says.
>>> >
>>> >Most windows in my car are Lexan which is much more forgiving.
>>> When drilling
>>> >Plexiglas (cast Acrylic) I use center or spotting drills. Works well. 
>>> >RF
>>> >----- Original Message -----
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as speedtimer at beyondbb.com
>
> http://autox.team.net/mailman/listinfo/land-speed