[Land-speed] tiny holes

[Glen Barrett]

Good idea Rich, I use center drills for 99% of the holes I drill. I also 
step drill to the larger sizes and in some cases ream for a good fit. Us old 
aircraft people were taught the proper way.
Glen
----- Original Message ----- 
From: "Rich Fox" <v4gr at rcn.com>
To: "landspeed at autox.team.net" <land-speed at autox.team.net>
Sent: Tuesday, September 25, 2007 10:51 AM
Subject: [Land-speed] tiny holes


>I understand your not wanting to invest to heavily in five holes. If you 
>can,
> it would be a big help to just touch the work piece with an "0" center 
> drill
> or smaller first. Gives the bit a good start on a straight hole.
> _______________________________________________
> speedtimer at beyondbb.com
>
> Land-speed mailing list
>
> http://autox.team.net/mailman/listinfo/land-speed