[Healeys] Axle tube measurement required

[Bob Haskell]

Michael,

The pilot on the factory tool (18G258) I have is 1.360".

Bob Haskell
Austin-Healey 3000 roadster registrar

On 3/17/25 11:20, Michael Salter wrote:
> Thanks to Mirek 1.366"
>
> M
>
> On Mon., Mar. 17, 2025, 11:17 a.m. , <m.g.sharp at sympatico.ca> wrote:
>
>     Mike, I think I understand the measurement you want – see the
>     photo to confirm.   I get the odd size of 1.366”. I cleaned the
>     inside of the tube so I think that is a good measurement.  That
>     diameter only continues for about 1.5” up the tube,  then the tube
>     diameter increases; I can just feel the change with my finger.
>
>     Give me a call if you want to walk me through anything. 519 841 0676.
>
>     Mirek
>
>     *From:*Healeys <healeys-bounces at autox.team.net> *On Behalf Of
>     *Michael Salter
>     *Sent:* March 17, 2025 10:02 AM
>     *To:* healeys at autox.team.net
>     *Subject:* [Healeys] Axle tube measurement required
>
>     Does anyone have the rear half shafts out of their hypoid (5 stud)
>     rear axle and could get me a measurement of the inside diameter of
>     the tube upon which the wheel bearing is mounted?
>
>     I am modifying a tool for the hub nut.
>
>     M
>
>
> _______________________________________________
> Support Team.Nethttp://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive:http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250317/f54be98e/attachment.htm>