[Healeys] Brake Line Flares

[Harold Manifold]

Hi Ron,

See the attached image. I used a 45-degree double flare with the fully
threaded nut.

Harold

On Wed, Jun 25, 2025 at 12:37 PM Ron Osowski via Healeys <
healeys at autox.team.net> wrote:

> Can anyone please provide the type of brake line flares needed at the
> brake light switch fitting and the four way connection on a phase 2 BJ8. I
> am replacing the servo input and output lines and would like to have the
> new lines flared  and formed before removing the old lines. It’s probably
> been 30 years or more since I last saw the inside of these fittings and
> cannot remember the flare type.
>
> Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/manifold@telus.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250625/fa98a7b1/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: common flares6.pdf
Type: application/pdf
Size: 765811 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20250625/fa98a7b1/attachment.pdf>