[Healeys] Rear shroud rivets

[Michael Salter]

The rivets along the rear lip of the shroud are not too difficult. I use
modified Vicegrips.
The ones along the bottom edge of the boot lid opening are a little more
difficult.
I made this special tool from a tie rod end separator. It does a great job.

Michael S

[image: image.png]


On Mon, Oct 23, 2023 at 7:00 PM Donald Tate <bn2cars at gmail.com> wrote:

> Getting ready to install the rivets in the rear shroud. Is there a
> ‘modern’ alternative to the peened factory rivets?
> Or a modern way to peen the rivets by hand?  I assume the factory had a
> special tool for this purpose.
>
>
>
> Sent from my iPhone
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20231023/1b76ed20/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 235535 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20231023/1b76ed20/attachment.png>