[Healeys] Best adhesive to install the boot lid seal

[Richard Collins]

I used 3M adhesive for rubber; used the small brush applicator that came with it. Not sure it was black.
I got it on wrong: put on the body instead of the lid but while not concours, it works
I have used the 3M spray for bigger areas like floor insulation or carpeting etc where overspray not a big deal.
Regards,
Richard C


On Oct 6, 2023, at 20:36, David Masucci via Healeys <healeys at autox.team.net> wrote:

 Hi All,

Does anyone have a recommendation for an adhesive to install the boot lid rubber seal. I have the black 3M weatherstrip and gasket adhesive, but I really don’t like they way it spreads and adheres to the surface of the lid. Is there an alternative?

Thanks,
Dave

64 BJ8
72 XJ6


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90@hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20231007/864008ca/attachment.htm>