[Healeys] Lubricant for SU carbs

[Alan Seigrist]

It also helps to make sure all your throttle linkage bushings are in good
shape

On Tue, Jul 11, 2023 at 10:11 AM Alan Seigrist <healey.nut at gmail.com> wrote:

> Your pedal will feel sticky because the levers are not properly adjusted.
> The manual explains generally how it should be set up.  For best results
> each lever in the linkage should travel the same mirror angle on the axis
> from closed to open - if you adjust each lever this way you will get a full
> throttle open.  Normally you get stickiness when one of the levers is too
> far forward whilst the throttle is closed, then you push the throttle and
> the angle is too steep.  You won't get full throttle this way and the lever
> arm can get stuck.
>
>
> On Tue, Jul 11, 2023 at 8:46 AM Jim Ryan <ryan at jimryan.com> wrote:
>
>> Any advice on lubricating the linkage on the SU's?  Would 3 in 1 be
>> sufficient?  My pedal feels a bit sticky.
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230711/317e8c01/attachment.htm>