[Healeys] Lubricant for SU carbs

[Alan Seigrist]

Your pedal will feel sticky because the levers are not properly adjusted.
The manual explains generally how it should be set up.  For best results
each lever in the linkage should travel the same mirror angle on the axis
from closed to open - if you adjust each lever this way you will get a full
throttle open.  Normally you get stickiness when one of the levers is too
far forward whilst the throttle is closed, then you push the throttle and
the angle is too steep.  You won't get full throttle this way and the lever
arm can get stuck.


On Tue, Jul 11, 2023 at 8:46 AM Jim Ryan <ryan at jimryan.com> wrote:

> Any advice on lubricating the linkage on the SU's?  Would 3 in 1 be
> sufficient?  My pedal feels a bit sticky.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230711/84beab40/attachment.htm>