[Healeys] BJ8 Center Console replacement

[Alan Seigrist]

I think I understand your question now.  You have to remove the bracket
completely, and re-install it after the console is in place on top of the
tunnel.  That's why I don't use it.

On Wed, Feb 15, 2023 at 1:52 PM Alan Seigrist <healey.nut at gmail.com> wrote:

> Hi Roger -
>
> Not sure what you are trying to describe, but honestly that lower bracket
> is totally unnecessary (do you mean this one?
> https://mossmotors.com/805-436-plate-console-to-gearbox-cover).
>
> I leave it off to make removing the console and tunnel much easier, they
> have to come out from time to time.  Dash and everything is very solid
> without this in place.
>
> Cheers,
>
> Alan
>
> On Wed, Feb 15, 2023 at 12:27 PM Roger Grace <roggrace at telus.net> wrote:
>
>> I recently had the transmission tunnel off my car.
>> No problems removing the console and tunnel.
>> Now struggling (many hours so far) to get the console fitted again.
>> In particular to get the slotted bracket on top of the tunnel to line up
>> with the 2 lower screws on the console. Over 3/4in difference in height.
>> Looks like it should go in at an angle, but the heater box is in the way
>> and reluctant to use too much force.
>> Does the heater box really have to be completely  moved out of the way ?
>> Any ideas or techniques appreciated.
>> Tkx
>> rg
>>
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230215/f0d809d4/attachment.htm>