[Healeys] BJ8 Center Console replacement
Alan Seigrist
healey.nut at gmail.com
Tue Feb 14 22:52:36 MST 2023
Hi Roger -
Not sure what you are trying to describe, but honestly that lower bracket
is totally unnecessary (do you mean this one?
https://mossmotors.com/805-436-plate-console-to-gearbox-cover).
I leave it off to make removing the console and tunnel much easier, they
have to come out from time to time. Dash and everything is very solid
without this in place.
Cheers,
Alan
On Wed, Feb 15, 2023 at 12:27 PM Roger Grace <roggrace at telus.net> wrote:
> I recently had the transmission tunnel off my car.
> No problems removing the console and tunnel.
> Now struggling (many hours so far) to get the console fitted again.
> In particular to get the slotted bracket on top of the tunnel to line up
> with the 2 lower screws on the console. Over 3/4in difference in height.
> Looks like it should go in at an angle, but the heater box is in the way
> and reluctant to use too much force.
> Does the heater box really have to be completely moved out of the way ?
> Any ideas or techniques appreciated.
> Tkx
> rg
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230215/c0e3d332/attachment.htm>
More information about the Healeys
mailing list