[Healeys] Gasket sealer

[Alan Seigrist]

Sorry, apparently the Permatex remains tacky too.... so it's equivalent to
Hylomar.

On Wed, Feb 15, 2023 at 11:38 AM Alan Seigrist <healey.nut at gmail.com> wrote:

> I think if you want to make sure the whole thing is sealed, best to use
> Hylomar spray if you can get it.  Permatex copper spray a gasket is also
> very good, but it dries, whereas the Hylomar doesn't dry, thus it does a
> better job of dealing with heat warping over time.
>
> On Wed, Feb 15, 2023 at 5:46 AM Fred Wescoe via Healeys <
> healeys at autox.team.net> wrote:
>
>> Listers,
>>
>> I have read that Wellseal is the recommended sealant when replacing a
>> copper head gasket.  I cannot find a source for Wellseal.  Anyone know of a
>> source to purchase the product or a suitable substitute?
>>
>> Thanks,
>>
>> Fred
>> 66BJ8
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230215/9312c2de/attachment.htm>