[Healeys] Gasket sealer

[Alan Seigrist]

I think if you want to make sure the whole thing is sealed, best to use
Hylomar spray if you can get it.  Permatex copper spray a gasket is also
very good, but it dries, whereas the Hylomar doesn't dry, thus it does a
better job of dealing with heat warping over time.

On Wed, Feb 15, 2023 at 5:46 AM Fred Wescoe via Healeys <
healeys at autox.team.net> wrote:

> Listers,
>
> I have read that Wellseal is the recommended sealant when replacing a
> copper head gasket.  I cannot find a source for Wellseal.  Anyone know of a
> source to purchase the product or a suitable substitute?
>
> Thanks,
>
> Fred
> 66BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230215/c0f928cb/attachment.htm>