[Healeys] Grose Type Float Valves

[Bob Spidell]

I've had them in my BJ8 for over 130K miles and 30 years and they've 
been flawless. However, quality was rumored to have suffered over the 
years; I tried them in my BN2 and one would stick occasionally and I 
went back to needle-type.


On 2/1/2023 10:20 PM, Alan Seigrist via Healeys wrote:
> Hi Price -
>
> Grose Jets work well, just replace the jets, that's it.  I highly 
> recommend, however, that a proper paper filter be put in the fuel line 
> because grose jets don't work when any crud gets in there.
>
> Clearance should be adjusted to be the same as normal.
>
> Best,
>
> Alan
>
> On Thu, Feb 2, 2023 at 12:28 PM R. Lindsay via Healeys 
> <healeys at autox.team.net> wrote:
>
>     I have a BJ8. Are float valve grose type side bow valves better
>     than the originals?  Do I need to use a different float lever or
>     just bend it down to seat and have still have 3/8” clearance under
>     the lever arms?  Do I need a different bowl lid?
>
>     Thank you.
>
>     Price Lindsay
>
>     Cell: 630-841-6300
>     Email: 050.rpl at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230202/d1d92e12/attachment.htm>