[Healeys] Canceling cam

[jomar healey]

 Thanks Curt.  That’s was my guess but guessing is seldom good.
Joe
    On Sunday, August 6, 2023 at 09:52:18 PM EDT, Curtis Arndt <cnaarndt at gmail.com> wrote:  
 
 Joe,
The lever and hence the cam needs to be at 6 o'clock. That way when you turn the wheel, the cam will ride over the canceling pawls at the 5 and 7 0'clock position, only about 20 degrees either side. This makes the reset much quicker. 
Putting the cam at the 12 o'clock position [WRONG] means the wheel will have to be rotated about 200 degrees before the reset will engage.
Cheers,
Curt Arndt
On Sun, Aug 6, 2023 at 11:56 AM Joseph Costa <healey53 at gmail.com> wrote:

When installing the stator tube and trafficator - non adjustable wheel - does the canceling cam sit on the top or bottom of the wheel.  TIA
Joe Factory 100M _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com


_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ah53@yahoo.com

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230807/b780cf73/attachment.htm>