[Healeys] Greasing the Driveshaft U Joint

[Richard Kahn]

Yes, I had to use a longer one.

Sent from my iPhone

> On Sep 29, 2022, at 10:21 AM, Harold Manifold <manifold at telus.net> wrote:
> 
> 
> Hello,
> 
> My Healey is nearing completion and after installing the driveshaft I tried to grease the U-Joint only to find the nozzle on my grease gun is too large to fit into the u-joint. Is there a grease gun with a narrow nozzle or a narrow nozzle extension? I replaced the u-joints and used the grease fittings that came with the new joints. Should the grease nipples (zerk fitting) be changed to the longer ones?
> 
> Thanks... Harold
> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/tahoehealey@hotmail.com
>