[Healeys] Head torque pattern

[P.M. Pollock]

David,

Do you recommend any lubricant on the threads?

For re-torquing:
On cold engine or hot?
Do you slack off the nuts any before re-torquing?

Thanks,

Pete Pollock

On 11/27/2022 2:32 PM, David Nock wrote:
>
> Cylinder head torque is in a circle starting from the center of the head.
>
> Start at about 30lbs first times then go to about 55 or 60 lbs, then finish up 
> at 75 ft lbs.
>
> Use a coating of Permatex Copper Coat on all surfaces prior to installing the 
> head.
>
> David Nock
>
> British Car Specilists
>
> *From: *Healeys <healeys-bounces at autox.team.net> on behalf of Fred Wescoe 
> <fredwescoe at gmail.com>
> *Date: *Sunday, November 27, 2022 at 12:37 PM
> *To: *healeys <Healeys at autox.team.net>
> *Subject: *[Healeys] Head torque pattern
>
> Listers,
>
> I am redoing my head gasket.  I know the manual has a small drawing of the 
> torque sequence but I don't have a way to enlarge it.
>
> Does anyone have a large, printable drawing of the head torquing sequence on a 
> 6 cylinder (BJ8)?
>
> Thanks,
>
> Fred
>
>
> _______________________________________________
> Support Team.Nethttp://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive:http://www.team.net/pipermail/healeys  http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/pollpete@ix.netcom.com
>

-- 
IMPORTANT - PLEASE NOTE:
This communication constitutes an electronic communication within the meaning of the Electronic Communications Privacy Act,
18 USC 2510.  Its disclosure is strictly limited to the recipient intended by the sender of this message.  This communication may
contain confidential and privileged material for the sole use of the intended recipient and receipt by anyone other than the
intended recipient does not constitute a loss of the confidential or privileged nature of the communication. Any review or
distribution by others is strictly prohibited.  If you are not the intended recipient please contact the sender by return electronic
mail and delete all copies of this communication.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20221128/db4de6ab/attachment.htm>