[Healeys] Head torque pattern

[David Nock]

Cylinder head torque is in a circle starting from the center of the head.
Start at about 30lbs first times then go to about 55 or 60 lbs, then finish up at 75 ft lbs.

Use a coating of Permatex Copper Coat on all surfaces prior to installing the head.

David Nock
British Car Specilists


From: Healeys <healeys-bounces at autox.team.net> on behalf of Fred Wescoe <fredwescoe at gmail.com>
Date: Sunday, November 27, 2022 at 12:37 PM
To: healeys <Healeys at autox.team.net>
Subject: [Healeys] Head torque pattern

Listers,

I am redoing my head gasket.  I know the manual has a small drawing of the torque sequence but I don't have a way to enlarge it.

Does anyone have a large, printable drawing of the head torquing sequence on a 6 cylinder (BJ8)?

Thanks,
Fred
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20221127/9b326faf/attachment.htm>