[Healeys] Correct Windscreen Wiper Components
healeyray at yahoo.com
Sat May 21 17:01:36 MDT 2022
Just wait till you try to figure out the wiring diagram.....
On Saturday, May 21, 2022, 03:48:59 PM PDT, Michael MacLean via Healeys <healeys at autox.team.net> wrote:
OK, the problem is solved for the correct length of tubing that runs from the wiper motor to the first wheel box. I had an incorrect wheel box setup connected to the correct motor for my BN2. It seems the rack and wheel box assembly for a BN1 is different in dimensions from the wiper motor to the first wheel box than it is for the BN2. The BN2 distance is longer. So, that problem is solved. But, solving one problem produces another. Now the spiral wound wire that drives the two wheel boxes is too short! I have sent to Moss for a replacement. Moss is smart enough to provide the drive wire longer than needed so it can be cut to the correct length. Nothing is simple on this car. It doesn't help hat I started with a rolling frame and a couple of shrouds. I have had to gather all the parts, drive train, etc from everywhere. Most parts between the BN1 and BN2 are interchangeable, but apparently some are not. It's been quite an education. Mike MacLean_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
Healeys at autox.team.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys