[Healeys] Re - BN2 Wiper rack fit
springer.mike51 at gmail.com
Sun May 15 14:15:27 MDT 2022
Another resource for parts is always welcome. Not sure if I need a 2
speed system though. In the 30 years I have owned my Bugeye/Frogeye I have
only been caught in the rain once here in Southern California. Usually if
it is raining I take the Honda or even my MGB GT if it's just light rain.
The Healeys just never see any moisture from above and live life in my
garage most of the time. Thanks you for the suggestion as tempting as it
On Sun, May 15, 2022 at 7:13 AM mike brooks <hypercubic at yahoo.co.uk> wrote:
> SVC (Stafford Vehicle Components) in the UK can supply the rack and Bundy
> tubing, flares, crank pin etc. to make your own rack. Their website also
> had a downloadable guide which shows how all the parts hang together. You
> might be better off starting again with new components that you can design
> to fit. You would also get a nice two speed motor. Replacing the pull
> switch with a "pull, turn and pull again" switch like the lighting switch
> would provide a two position switch which would take the original wiper
> switch knob.
> Note I haven't done the above on my BN2, but I'm fairly sure SVC would be
> able to supply something that would work. They were very helpful a few
> years ago when I was building a kit car. No commercial interest etc.
> Mike Brooks
> '56 BN2
> Sent from Yahoo Mail on Android
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys