[Healeys] Rear Wing (Fender) Fasteners
michaelsalter at gmail.com
Sat Jan 22 16:53:22 MST 2022
I think the countersunk screw is used because the cockpit combing passes
over that spot.
On Sat., Jan. 22, 2022, 1:43 p.m. Harold Manifold via Healeys, <
healeys at autox.team.net> wrote:
> The rear wings were off my BT7 when I received it so I don’t have an as
> built reference. I have fitted the rear wings using an AH Spares new
> fastener kit but ran out of fasteners for the last hole at the bottom of
> the wing. What type of fastener goes here? Is it a regular nut and bolt or
> a Speed nut and bolt like the others. Any D washers used at this spot?
> Second question. Where the rear wing meets the B post it is fastened with
> a screw through a 1” x 3 ¼” tapped plate. The service parts lists call for
> a ¼” x 5/8” flat head (countersunk) screw. Is there a reason this is a flat
> head screw as opposed to a hex head screw? Will the hex head screw create a
> clearance issue for future parts?
> Thanks… Harold
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/pipermail/healeys
> Healeys at autox.team.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys