[Healeys] 6 cyl heater tap on the block

[BJ8Healeys]

Mine does.

 

From: Richard Kahn [mailto:tahoehealey at hotmail.com] 
Sent: Sunday, April 17, 2022 12:06 PM
To: healeys at autox.team.net; BJ8Healeys
Subject: Re: [Healeys] 6 cyl heater tap on the block

 

Is the lever suppose move all the way to the perpendicular position?

  _____  

From: Healeys <healeys-bounces at autox.team.net> on behalf of BJ8Healeys via
Healeys <healeys at autox.team.net>
Sent: Sunday, April 17, 2022 7:01 AM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: Re: [Healeys] 6 cyl heater tap on the block 

 

The ON position is at the full counterclockwise rotation of the handle.

The last time I had the valve off I took it apart, cleaned it, and applied
anti-seize compound to the tapered shaft.  Still works very smoothly.

 

Steve Byers

HBJ8L/36666

BJ8 Registry

AHCA Delegate at Large

Havelock, NC  USA

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Richard
Kahn
Sent: Saturday, April 16, 2022 1:02 PM
To: Bob Spidell; healeys at autox.team.net
Subject: Re: [Healeys] 6 cyl heater tap on the block

 

Your photo made me check. It actuall does say off and on the valve. Still
the lever seems ot be half way between off and on. I have learned not to fix
anything that is working.  So, 7:30 it is until it starts leaking someday. 

 

  _____  

From: Healeys <healeys-bounces at autox.team.net> on behalf of Richard Kahn
<tahoehealey at hotmail.com>
Sent: Saturday, April 16, 2022 9:56 AM
To: Bob Spidell <bspidell at comcast.net>; healeys at autox.team.net
<healeys at autox.team.net>
Subject: Re: [Healeys] 6 cyl heater tap on the block 

 

Did I miss the answer to the question? Is it closed in the counterclockwise
position? My BJ8 is open (getting heat) with the lever at the 7:30 position
viewed from the front. It has always been that way. In US plumbing the heat
would be off with the lever perpendicular to the hose and valve. 

  _____  

From: Healeys <healeys-bounces at autox.team.net> on behalf of Bob Spidell
<bspidell at comcast.net>
Sent: Saturday, April 16, 2022 9:43 AM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: Re: [Healeys] 6 cyl heater tap on the block 

 

Oh, I should have added: Be careful trying to turn, esp. if it hasn't 
been 'exercised' in a while. The handle is fragile (maybe soak in a 
penetrant first). Also, the valve is spring-loaded, if you can push it 
in and out a few times may help loosen it.

On 4/16/2022 12:57 AM, Alan Seigrist via Healeys wrote:
> Quick Q -
>
> If looking at the tap from the top, is it closed with the lever in the 
> full counterclockwise position, or the full clockwise positiom?
>
> Happy Easter &
> Happy Passover!
>
> Cheers,
>
> Alan
>

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys
http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/tahoehealey@hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220417/9be4cc7d/attachment.htm>