[Healeys] OD problem update---BJ8

[Tom Felts]

Yep, the 3/16 rod/hole alignment didnt work.  So happy he came over today.  
----- Original Message -----
From: Perry Small <healeyguy at aol.com>
To: Tom Felts <tomfelts at windstream.net>
Cc: healeys <healeys at autox.team.net>
Sent: Mon, 04 Apr 2022 18:10:21 -0400 (EDT)
Subject: Re: [Healeys] OD problem update---BJ8

Understand that the lever was misadjusted by 40 thousands. Lining up using the alignment pin does not always allow the O/D to operate properly. Glad that it is working again. 
Perry

Sent from my iPhone

> On Apr 4, 2022, at 1:21 PM, Tom Felts via Healeys <healeys at autox.team.net> wrote:
> 
> Today is a good day.  My OD rebuilder came by and after adjusting the OD lever, the OD goes in and out perfectly!!  I'm happy.  Thank you Andy--my rebuilder.  We did do a pressure test ---max pressure was 325psi.  
> 
> Tom