[Healeys] Accessing OD/Solenoid adjustment

[Michael Salter]

I'm pretty sure that you will need to remove the entire gearbox cover.

M

On Fri., Apr. 1, 2022, 3:48 a.m. Simon Lachlan via Healeys, <
healeys at autox.team.net> wrote:

> Trying again:-…….
>
> It seems plain that I’ll certainly be testing out the solenoid then
> probably having to adjust the rise/fall of the “lever – solenoid” that
> moves the operating valve up & down.
>
> It is ages, if it ever happened, that I had to access this lever myself.
> It’s behind a plate/cover which, on my BT7 at least, is precisely level
> with the floor pan and the raised section thereof for the tunnel cover. I
> could get the cover off at a pinch but no way could I do a decent job with
> the lever. So…………how much do I have to do to be able to jack that end of
> the gearbox up to gain access?
>
> Thanks,
>
> Simon
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220401/69c9ff65/attachment.htm>