[Healeys] BJ 8 Carb Needles

[R. Lindsay]

Thanks Bob. 

Price Lindsay

Cell: 630-841-6300
Email: 050.rpl at gmail.com

Sent from my iPhone

> On Sep 17, 2021, at 11:30 AM, Bob Spidell <bspidell at comcast.net> wrote:
> 
>  Always the contrarian, and FWIW I've run Grose Jets in my BJ8 with no fuel filter for well over 100K miles with no issues. OTOH, I got a newer set for my BN2 and didn't like the way they operated (the little ball on top would get stuck). Rumor has it the company was bought out and quality suffered (shocking, I know--looking at you, County). 
> 
> I'm not a big believer in fuel filters for Healeys; I figure anything that gets by the little brass 'thimbles' in the carbs will settle in the float bowls or pass through; better to invest in a clean tank and new lines if necessary. I cut my Ranger's fuel filter open at over 100K miles, and all I found was some tiny black flakes, which I figured came from the plastic tank (filters are absolutely necessary in FI engines).
> 
> Bob
> 
> On 9/17/2021 6:37 AM, R. Lindsay via Healeys wrote:
>> Thank you Alan. 
>> 
>> Price Lindsay
>> 
>> Cell: 630-841-6300
>> Email: 050.rpl at gmail.com
>> 
>> Sent from my iPhone
>> 
>>> On Sep 16, 2021, at 10:06 PM, Alan Seigrist <healey.nut at gmail.com> wrote:
>>> 
>>> 
>>> Hi Price -
>>> 
>>> Yeah there are two balls in there, a big one and a small one.  They don't move much. Grose jets are very good provided you have decent fuel filter keeping dirt out of the carbs... otherwise they are useless.  Also Grose jets don't do all that well if the car sits for long periods.  I actually found the old style jets are a bit less finicky, but you do need to tap the carbs with a plastic mallot from time to time to keep them from overflowing.
>>> 
>>> Best,
>>> 
>>> Alan
>>> 
>>> On Thu, Sep 16, 2021 at 11:11 PM R. Lindsay via Healeys <healeys at autox.team.net> wrote:
>>>> I installed the Grose-Jet needle assembly in my carbs some time back. When disassembling the float chambers to clean them, I see that the ball in the bottom moves VERY little, but does rattle. Is this type of valve supposed to move up like the old “needle and seat” type??
>>>> 
>>>> Thank you for your help. 
>>>> 
>>>> Price Lindsay
>>>> 
>>>> Cell: 630-841-6300
>>>> Email: 050.rpl at gmail.com
>>>> 
>>>> Sent from my iPhone
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>> 
>>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>>> 
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>> 
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>>> 
>> 
>> 
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> 
>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>> 
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/050.rpl@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210917/a78a72a3/attachment.htm>