[Healeys] Clutch

josef-eckert at t-online.de josef-eckert at t-online.de
Thu Sep 2 01:50:57 MDT 2021

There is no need to bleed the clutch, when taking the tranny out. Just 
disconnect the slave cylinder from the bellhousing.
Josef Eckert
Betreff: Re: [Healeys] Clutch
Datum: 2021-09-02T02:29:31+0200
Von: "John Sims via Healeys" <healeys at autox.team.net>
An: "William Atterbury" <watterbury at yahoo.com>, "healeys at autox.team.net" 
<healeys at autox.team.net>
All this talk about working on the OD and clutch makes it important to 
install a remote bleeder for the clutch at reinstallation
John Sims<http://www.healey6.com>

Sent from the all new AOL app for iOS

On Wednesday, September 1, 2021, 8:22 PM, William Atterbury via Healeys 
<healeys at autox.team.net> wrote:

    Anytime I’ve had the gearbox out I replace the clutch, pressure plate
    and throw up bearing.  Resurfacing the flywheel is common, but ask the
    machine shop.  Usually, there is checking, gouges, grooves or
    discoloration that say “please reface me”.
    Support Team.Net<http://www.team.net/donate.html>
    Suggested annual donation  $12.75
    Archive: http://www.team.net/pipermail/healeys
    Healeys at autox.team.net <mailto:Healeys at autox.team.net>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210902/67b984c9/attachment.htm>

More information about the Healeys mailing list