[Healeys] Tank Straps

[Michael Salter]

I am pretty sure that the straps are the same length Mike.
There is a difference in the positioning of the rivets that attach the
fiber strips to the straps.
I have found that if can get a nut started just tighten it a bit and things
will sinch down enough.

M

On Sun., May 2, 2021, 10:12 p.m. Michael MacLean via Healeys, <
healeys at autox.team.net> wrote:

> The tank straps I bought don't seem to be quite long enough.  The threaded
> fitting that is bolted to the boot floor of my BN2 barely protrude below
> the boot floor to get a nut on.  When I look in the Moss catalog there is a
> different part number for the BN1/2 tank strap and another for the BN4 to
> BJ8 strap.  Do I take it the BN1/2 strap is a different length than the
> later version? Of course the BN1/2 tank strap in the Moss catalog is N/A.
> If the early straps are longer than the later ones, I will be in the market
> for a pair, used or new.  Looking at the suppliers in the UK the tank strap
> they list says it is appropriate for BN1 through BJ8 for one supplier and
> another UK supplier just does not list the BN1/2 tank strap.  I don't think
> it is safe the way the tank strap I have only has a few threads of
> engagement holding it to the floor.  Any ideas on this subject?
> Mike MacLean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210502/64d85cd8/attachment.htm>