[Healeys] MORE: Dip Switch

[Alex]

Perfect info! Thank you, Bruce.

== Alex


On 5/2/2021 10:48 AM, Bruce Steele wrote:
>
> The bracket that secures the dip switch to the floor is secured by 2 
> screws, one above and below the switch itself on the bracket feet. The 
> switch is then secured to the bracket by 2 screws from the back side.  
> Hence, you have to remove the whole unit to get the switch out.  The 3 
> wires are secured to the switch by screw terminals.  Be sure to note 
> the position of each color wire.  Getting to the bracket screws is a 
> pain.  A long extension and U-joint or swivel adapter help.
>
> Here’s a photo showing the bracket mounting screws.  You can also see 
> the switch mounting screws protruding through the switch plate.  (I 
> fabricated a dead pedal that mounts under the dip switch bracket, so 
> you can ignore the extraneous metal bits.)
>
> Bruce Steele
>
> Brea, CA
>
> 1960 BN7
>
> *From:*Healeys [mailto:healeys-bounces at autox.team.net] *On Behalf Of *Alex
> *Sent:* Friday, April 30, 2021 5:24 AM
> *To:* healeys at autox.team.net
> *Subject:* Re: [Healeys] Dip Switch
>
> How is the dip switch mounted on my BT7?   I need to remove it as it 
> is no longer functional.
>
> Thanks for any info!
>
> == Alex in Maine, "The Blue Mainie' BT7 and 1946 MG-TC.
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210502/ea0c02f0/attachment.htm>