[Healeys] BN2 screw in the center of the dash

[Bob Spidell]

I neglected to mention the screw is backed-up with a large, extra thick 
flat washer (because of the large hole in the bracket). It's unique 
because it's as thick as a couple of typical flat washers and /might--/I 
don't recall for sure--be tapped for the screw.

On 3/21/2021 10:21 PM, Bob Spidell wrote:
> Yep. And, the original screw is chromed posidriv, with a slightly 
> oversized--the screw is a #10 IIRC--chrome washer. I noted this when 
> we tore down our BN2 for restoration, and promised myself I'd not lose 
> these. I lost them (and have never found proper replacements).
>
> You can sorta see them in this grainy photo (I /shoulda/ took more).
>
> Bob
>
> On 3/21/2021 4:14 PM, Joseph Costa wrote:
>> Does it just attach to the brace behind the dash?
>>
>> Joe
>> BN1 #923
>> BN2 100M
>> BJ8 Blue Baby
>>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210321/a4d5b3e4/attachment.htm>