[Healeys] throttle linkage

[Jim Werner]

Once you remove the bolts replace them with allen head bolts for easier reassembly 

Jim WernerLouisville, KY

-----Original Message-----
From: Bob Spidell <bspidell at comcast.net>
To: healeys at autox.team.net
Sent: Wed, Mar 3, 2021 12:26 am
Subject: Re: [Healeys] throttle linkage

 From underneath, with a socket, ratchet and several 'wobble' extensions?

On 3/2/2021 9:18 PM, healeymanjim via Healeys wrote:
> BT7 with sticking throttle linkage.  assumed it needed lubrication so shot some oil onto the linkage.  now the accelerator
> relay shaft lever (#38 page 40 moss catalog) is slipping on the shaft and can only get half throttle.  anyone have any ideas
> on how to tighten the bolt without removing the engine.  pretty tight up in there.
>

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/jwhlyadv@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210303/b0ac2a21/attachment.htm>