[Healeys] Overdrive Setting Lever O-Ring

[i erbs]

Is there oil in it? It looks too clean. Maybe that's the problem

Ira Erbs
1959 AH 100-6
1967 MGB
Milwaukie, OR

On Mon, Jun 28, 2021, 11:42 AM Harold Manifold via Healeys <
healeys at autox.team.net> wrote:

> Hello,
>
>
>
> I have a leak from the O-Ring behind the Setting lever on the overdrive. I
> know the O-Ring can be replaced without disassembling the overdrive unit
> once the setting lever is removed. The setting lever on my overdrive is
> held inplace with a solid push pin. Likely the original pin. I have tried
> to remove the pin with the right sized punch but it doesn’t budge.
>
>
>
> Before I break something, does anyone know what type of pin was likely
> used? Is it a straight pin or a tapered pin? If it is tapered pin any tips
> on figuring out which is the big end. There is always drilling but not the
> easiest place to get at.
>
>
>
> Thanks…. Harold
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210629/adaa5967/attachment.htm>