[Healeys] 100 choke

[Alan Seigrist]

It’s pretty simple, you cut a slot in the sheath near the knob , install a
half moon, and slip a spring steel cylinder over the half moon.

On Tue, 29 Jun 2021 at 9:50 PM, <warthodson at aol.com> wrote:

> Alan,
> My 100 project did not include a choke cable. I am searching for a
> replacement & want to make sure I understand what should be OE. For my
> education, how is the half moon assessed. Or to say it another way how is
> the half moon re-installed?
> Gary Hodson
>
> -----Original Message-----
> From: Alan Seigrist <healey.nut at gmail.com>
> To: Warthodson at aol.com <warthodson at aol.com>
> Cc: healeys at autox.team.net <healeys at autox.team.net>
> Sent: Tue, Jun 29, 2021 8:39 am
> Subject: Re: [Healeys] 100 choke
>
> Gary -
>
> Usually there's a little half moon in there which wears out, so if you
> just fabricate a new half moon, the friction lock will work again.
>
> On my BN1 the choke just pulls out and stays there, so no need for
> friction lock.
>
> Best,
>
> Alan
>
> On Sun, Jun 27, 2021 at 6:41 AM warthodson--- via Healeys <
> healeys at autox.team.net> wrote:
>
> Did the OE 100 choke cable feature the 1/4 turn friction lock like on the
> BJ8's for example?
> If yes, do any of the suppliers sell a repro that includes a good quality
> lock with the correct knob or even better does anyone have a good used OE
> one for sale?
> Gary Hodson
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210629/89feab92/attachment.htm>