[Healeys] Toyota 5 speed shifter location change

[richard mayor]

Sorry, I meant to post this on the British Car Forum in response to
questions about shifter positions.

On Mon, Jun 14, 2021 at 5:05 PM <alfuller194 at gmail.com> wrote:

> Hi Richard:
>
>
>
> What are you trying to accomplish / why do you need to change the shifter
> position? The shift tower in the picture appears to be correct for a center
> shift big Healey… Also, don’t the modern Healey 5-Speed kits come with a
> shift tower and shift lever?
>
>
>
> Did I miss an email describing the issue?
>
>
>
> ----------------
>
> All the best,
>
>
>
> Al Fuller
>
>
>
> *From:* Healeys <healeys-bounces at autox.team.net> *On Behalf Of *richard
> mayor via Healeys
> *Sent:* Monday, June 14, 2021 2:39 PM
> *To:* healeys <healeys at autox.team.net>
> *Subject:* [Healeys] Toyota 5 speed shifter location change
>
>
>
> In the attached photo you will see examples of two different length arms,
> each with a socket at the end for the bottom end of the shifter stick to go
> into.  These arms are attached to an internal shifter rod by a single bolt.
>
> In order to change the shift lever position, it is necessary to change the
> tower AND the arm with the socket that has the appropriate length. In order
> to change the arm it is necessary to open up the transmission to gain
> access to the arm and shifter rod.  It is impossible to do this without
> splitting the transmission.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210614/61456d43/attachment.htm>