[Healeys] P-Clip locations
gradea1 at charter.net
gradea1 at charter.net
Thu Jun 10 18:50:04 MDT 2021
The early cars used clips that were yellow zinc coated. Later BN1s and
BN2 used clips that were plain metal as shown on the photo from Perry.
(that's a BN2 setup, as you can see by the yellow tracer in the
harness. Hank
-----------------------------------------From: "Bob Haskell"
To: "Eric Metzner"
Cc: healeys at autox.team.net
Sent: Thursday June 10 2021 2:40:05AM
Subject: Re: [Healeys] P-Clip locations
Did the clips fitted to the 100s have a different finish - yellow
zinc
instead of clear zinc?
Cheers,
Bob Haskell
Austin Healey 3000 BN7/BT7 registrar
On 6/10/21 3:32 AM, Eric Metzner wrote:
> Harold and Jean,
> many thanks for your support, very helpful and appreciated. CSR
looks
> promising, will get in touch with them.
> Cheers
> Eric
>
> Von meinem iPhone gesendet
>
>> Am 09.06.2021 um 19:38 schrieb gradea1 at charter.net:
>>
>> Here are the P-clips shown on an early BN1. There is one large
one
>> needed (called main harness clip) which is at the junction of the
>> harness into the firewall bulkhead (large hole). Its a sorting
>> puzzle, but the size of the harness at the selected hole
determines
>> the proper clip to use. Hank
>>
>> -----------------------------------------
>>
>> From: "Eric Metzner"
>> To: "David Nock BCS"
>> Cc: "Ahealey help"
>> Sent: Wednesday June 9 2021 9:40:32AM
>> Subject: Re: [Healeys] P-Clips
>>
>> Hey Listers, in addition to the screw question I’m struggling
with
>> the amount and sizes of the different p-Clips needed for a BN1.
>> Couldn’t find any information related on that, suppliers
available
>> in Europe only state „small, medium, large“ but no info about
how
>> many of each are needed.
>>
>> Thanks a lot in advance
>> Eric
>> BN1, October 1954
>>
>> Von meinem iPhone gesendet
>>
>> Am 09.06.2021 um 17:26 schrieb David Nock BCS
>> :
>>
>>
>> The firewall they were 10/32 machine screws with nuts on the
>> inside. Then along the frame rail and other locations they would
>> have been a #8 sheet metal screw.
>> David Nock
>> healeydoc at sbcglobal.net
>> 209 948 8767
>> www.britishcarspecialists.com
>>
>>
>> *From:* Roland Wilhelmy
>> *Sent:* Tuesday, June 08, 2021 7:38 PM
>> *To:* Michael MacLean
>> *Cc:* Ahealey help
>> *Subject:* Re: [Healeys] P-Clips
>> They were sheet metal screws. I need to check the head shape and
>> size (6 or 8). But if you aren't worried about Concurse just use
>> the smallest size that will fit your holes.
>> -Roland
>> On Tue, Jun 8, 2021, 6:41 PM Michael MacLean
>> wrote:
>>
>> Can someone tell me what size and type fastener was used to
>> install wiring harness P-clips in places like the engine bay?
>> Was it sheet metal screws? It would be a lot easier to
>> install the clips if I didn't have to put a nutsert in all
>> those places in the engine bay of my BN2.
>> Mike MacLean
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
/> >>
/> >> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
/> >>
/> >> http://autox.team.net/archive [1]
/> >>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
/> >>
/> >>
>> Unsubscribe/Manage:
>>
http://autox.team.net/mailman/options/healeys/sentenac.rw@gmail.com
/> >>
/> >>
>>
------------------------------------------------------------------------
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
/> >>
/> >> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
/> >>
/> >> http://autox.team.net/archive [2]
/> >>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
/> >>
/> >>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
/> >>
/> >>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
/> >>
/> >> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
/> >>
/> >> http://autox.team.net/archive [3]
/> >>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
/> >>
/> >>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/ericmetzner@gmx.de
/> >>
/> >>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
/> > Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys [4]
http://autox.team.net/archive
/> >
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
/> >
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
/> >
Links:
------
[1] http://autox.team.net/archive
[2] http://autox.team.net/archive
[3] http://autox.team.net/archive
[4] http://www.team.net/pipermail/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210611/73e4b992/attachment.htm>
More information about the Healeys
mailing list