[Healeys] P-Clips

[David Nock BCS]

The firewall they were 10/32 machine screws with nuts on the inside. Then along the frame rail and other locations they would have been a #8 sheet metal screw.  


David Nock
healeydoc at sbcglobal.net
209 948 8767
www.britishcarspecialists.com




From: Roland Wilhelmy 
Sent: Tuesday, June 08, 2021 7:38 PM
To: Michael MacLean 
Cc: Ahealey help 
Subject: Re: [Healeys] P-Clips

They were sheet metal screws. I need to check the head shape and size (6 or 8). But if you aren't worried about Concurse just use the smallest size that will fit your holes.  
-Roland

On Tue, Jun 8, 2021, 6:41 PM Michael MacLean <springer.mike51 at gmail.com> wrote:

  Can someone tell me what size and type fastener was used to install wiring harness P-clips in places like the engine bay?  Was it sheet metal screws?  It would be a lot easier to install the clips if I didn't have to put a nutsert in all those places in the engine bay of my BN2. 
  Mike MacLean
  _______________________________________________
  Support Team.Net http://www.team.net/donate.html
  Suggested annual donation  $12.75

  Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

  Healeys at autox.team.net
  http://autox.team.net/mailman/listinfo/healeys

  Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/sentenac.rw@gmail.com




--------------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210609/3ea4cbe5/attachment.htm>