[Healeys] Washers for Rubber Buffers?

[Michael Salter]

Yes I  believe that Jean is correct however I  think originally they were
copper plated.

M

On Sun., Jul. 25, 2021, 3:07 p.m. Jean Caron via Healeys, <
healeys at autox.team.net> wrote:

> The washers are made of steel.
>
>
>
> Jean
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Harold Manifold via Healeys <healeys at autox.team.net>
> *Sent: *July 25, 2021 1:40 PM
> *To: *Ken Fleming via Healeys <healeys at autox.team.net>
> *Subject: *[Healeys] Washers for Rubber Buffers?
>
>
>
> Hello,
>
>
>
> I am getting ready to install the rubber fender and hood buffers. I have
> copper split rivets but what material should the washers be? These are
> quite visible when the hood is opened so I would like to get it right. All
> of the original washers used on my 1960 BT7 were zinc plated steel but I
> have read the washers should be copper.
>
> The attached picture is one of the fender buffers but I assume all of the
> washers should be the same.
>
>
>
> I would appreciate any advise for my car.
>
>
>
> Harold
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210725/f4a6c789/attachment.htm>