[Healeys] Crank Nut Socket

[Richard J. Hockert]

43 mm

Best regards,
Jim

> On Jul 19, 2021, at 7:45 AM, Michael Salter via Healeys <healeys at autox.team.net> wrote:
> 
> 
> Pretty positive that the4's & 6's use the same nut ...
> I  guesseg the socket size incorrectly.  1  11/16.
> 
>> On Sun., Jul. 18, 2021, 11:23 p.m. Michael MacLean, <springer.mike51 at gmail.com> wrote:
>> The only SAE socket I have that fits a little loosely is 1 3/4".  It's a rather large nut with the catch lugs for a starter crank.  Possibly from another car?
>> Mike MacLean
>> 
>>> On Sun, Jul 18, 2021, 2:51 PM Michael Salter <michaelsalter at gmail.com> wrote:
>>> The socket isn't that special Mike. 1 3/16 as I recall.
>>> 
>>> M
>>> 
>>>> On Sun., Jul. 18, 2021, 5:49 p.m. Michael MacLean via Healeys, <healeys at autox.team.net> wrote:
>>>> Anyone know where to get a 1" Whitworth/1 1/8" BS socket to tighten my BN2 Crank nut?
>>>> Mike MacLean
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>> 
>>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>>> 
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>> 
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>>> 
> 
> <20210719_084125.jpg>
> <20210719_084022.jpg>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rjhco@att.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210719/84e52579/attachment.htm>