[Healeys] Crank Nut Socket

[Alan Seigrist]

once you go that big, you can easily get the socket in mm as well.  In
fact, all my large sockets are mm because they are much cheaper!


On Mon, Jul 19, 2021 at 8:47 PM Michael Salter via Healeys <
healeys at autox.team.net> wrote:

> Pretty positive that the4's & 6's use the same nut ...
> I  guesseg the socket size incorrectly.  1  11/16.
>
> On Sun., Jul. 18, 2021, 11:23 p.m. Michael MacLean, <
> springer.mike51 at gmail.com> wrote:
>
>> The only SAE socket I have that fits a little loosely is 1 3/4".  It's a
>> rather large nut with the catch lugs for a starter crank.  Possibly from
>> another car?
>> Mike MacLean
>>
>> On Sun, Jul 18, 2021, 2:51 PM Michael Salter <michaelsalter at gmail.com>
>> wrote:
>>
>>> The socket isn't that special Mike. 1 3/16 as I recall.
>>>
>>> M
>>>
>>> On Sun., Jul. 18, 2021, 5:49 p.m. Michael MacLean via Healeys, <
>>> healeys at autox.team.net> wrote:
>>>
>>>> Anyone know where to get a 1" Whitworth/1 1/8" BS socket to tighten my
>>>> BN2 Crank nut?
>>>> Mike MacLean
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>>
>>>> Archive: http://www.team.net/pipermail/healeys
>>>> http://autox.team.net/archive
>>>>
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>>>
>>>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210719/246c79ff/attachment.htm>