[Healeys] 100 seat recovering

[Peter Svilans]

Hi Shawn,

(B) was the original method used by trimmers skilled in curved needle 
work.

(A) can be used with our modern SuperGlues, not available back in the 
day.  Normal contact adhesive doesn't work with vinyl to vinyl.

The intent was to fold the outer ear up to the piping ball with a near 
invisible joint. Glue will accomplish this, but if you want the original 
slightly bumpier look, then stitch.

The picture is of an original seat ear with the Hidem strip removed 
(hence the tack holes).  Note the little cut along the bottom which is 
the transition between the folded over edge to the main cover sitting 
behind the lower piping bead.

Best regards,

Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210713/799d4b9d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P7130806(medium).JPG
Type: image/jpeg
Size: 225402 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210713/799d4b9d/attachment.jpe>