[Healeys] BJ8---clutch and "SS" aka--scuttle shake

[john harper]

Tom

Have you checked the prop shaft?

Could it be loose, worn where the needle bearings are, or out of Phase.

Regards

On Thu, 8 Jul 2021 at 14:00, Tom Felts <tomfelts at windstream.net> wrote:

> Recently (maybe 6 months ago) I installed a new clutch disc and TOB.  (PP
> looked good so didn't add a new one)  Shifts great but when starting the
> car even with it out of gear, it "groans" a second or so when the engine
> starts but goes away and I would only hear it at times when I down
> shifted.  Once hot I never heard it.  Then--------I took a 600 mile trip
> over the last two days.  I began to hear it more and at different
> times---Pushing the clutch in, starting the car and downshifting.  Several
> times I heard what sounded like a "ping" when I pressed the cutch pedal.
>
> I have a hunch it is the PP-----could be one of the fingers got bent when
> installing??  Otherwise, I have no idea.
>
> Second------for the years I have had this car, I have hated the dreaded
> scuttle shake.  I have balanced all wheels--even added the scuttle shake
> "mod"  (cross beams on the inner body, behind the engine) and had the rear
> drums balanced locally.  All to no avail-----between 55 and 65 there is
> comes again!!  The drive was wonderful all the while as long as I drove
> slower or faster than these speeds.
>
> What to do------what to do???
>
> Any thoughts would be appreciated.
> Tom
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210708/1bca1c05/attachment.htm>