[Healeys] Battery Master Switch Connections

[Richard Kahn]

I believe many disconnect the c-b wire because it often causes problems so your 2 post switch may work.


________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Harold Manifold <manifold at telus.net>
Sent: Friday, January 22, 2021 11:31 AM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: [Healeys] Battery Master Switch Connections

Hello,

I have a very good 2 post replica of the original 3 post Battery Master Switch BMC part 1B2804. How did the original 3 post work? I found this schematic that Moss did. Does it work like this: In the ON position B and E are connected and in the OFF position E and C-B are connected? If this is the case then there is no place to connect C-B on a 2 pole switch.

Do I have this right?

Harold


[cid:643582019 at 22012021-226E]


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210122/8a1ddb27/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Battery Master Switch 1B2804.JPG
Type: image/jpeg
Size: 65109 bytes
Desc: Battery Master Switch 1B2804.JPG
URL: <http://autox.team.net/pipermail/healeys/attachments/20210122/8a1ddb27/attachment.jpe>