[Healeys] Battery Master Switch Connections

[Michael Salter]

Yes ....
B = battery,
E = earth (ground)
cb = contact breaker (ignition points)

M

On Fri., Jan. 22, 2021, 2:31 p.m. Harold Manifold, <manifold at telus.net>
wrote:

> Hello,
>
> I have a very good 2 post replica of the original 3 post Battery Master
> Switch BMC part 1B2804. How did the original 3 post work? I found this
> schematic that Moss did. Does it work like this: In the ON position B and E
> are connected and in the OFF position E and C-B are connected? If this is
> the case then there is no place to connect C-B on a 2 pole switch.
>
> Do I have this right?
>
> Harold
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210122/52702e35/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Battery Master Switch 1B2804.JPG
Type: image/jpeg
Size: 65109 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210122/52702e35/attachment.jpe>