[Healeys] Trunk Lid Seal

[Michael Oritt]

Mike--

The surface away from your thumb (the "top" of the parallelogram) gets
glued to the underside of the lid with the ends butted up at the top of the
lid or what would be the bottom when working on things from inside the boot.
Use "yellow peril" or a similar adhesive in black--sparingly....



On Wed, Jan 6, 2021 at 1:54 AM Michael MacLean <rrengineer.mike at att.net>
wrote:

> In the picture included with this post you can see a cross sectional view
> of the rubber boot lid seal that I purchased from Moss.  Can someone tell
> me which edge(s) gets to glued to what surface on the underside of the boot
> lid?  There are no surfaces that are 90 degrees to each other.  Kind of
> confusing.
> Mike MacLean
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210106/ea84ac54/attachment.htm>